Filter
Top Products
THE CPL PROTOCOL 6 - 15
LOCAL LOCKOUT LL
Purpose:
This instruction will inhibit the Go to Local function of the STATUS/LOCAL key on
the frontpanel.
Once activated, the Local Lockout State is disabled by sending the Go to Local
(GL), the Reset Instrument (RI) command or by cycling power OFF and ON.
(Refer also to "Go to Remote" and "Go to Local").
There is no front panel equivalent for this command.
Command:
Response:
Example:
100 PRINT #1,"LL" :’Send Command
110 GOSUB 1000 :’Sync on acknowledge
Local, Remote, Remote+Local Lockout States
"LL" CR
acknowledge CR
power-on
<STATUS/LOCAL button>
Remote State
Remote with
Local Lockout
State
Local State
"Go to Local"
"Reset Instrument"
"Go to Local"
"Reset Instrument"
"Go to Remote"
"Local Lockout"