Fluke PM3370B Hunting Equipment User Manual


 
5 - 64 FUNCTION REFERENCE
AUTO SETTING (USERPROGRAM) Indicates that instrument performs an
userprogrammed autoset.
Function ’AUTOSET USERPROG’.
CALIBRATION COMPLETED Autocalibration is completed.
Function ’CALIBRATION AUTOCAL’.
CALIBRATION ERROR ... Autocal not successfully completed.
Function ’CALIBRATION AUTOCAL’.
CH. 50 OVERLOAD Input voltage at 50 input impedance is
too high.
Function ’INPUT IMPEDANCE’
DESTINATION PROTECTED MATH1 (2) is activated while register M1
(2) is protected.
Functions ’ADD’, ’FILTER’,
’MATHEMATICS’, ’MULTIPLY’ and
’SUBTRACT’.
FUNCTION ONLY IN ANALOG Function activated in digital mode, but is
only present in analog mode.
Function ’ANALOG MODE’.
HARDCOPY ABORTED Print or plot action has been aborted.
Function ’PRINTING AND PLOTTING’.
HARDCOPY BUSY : ..% DONE Instrument is busy with a print/plot action.
Function ’PRINTING AND PLOTTING’.
HARDCOPY DONE Print/plot or abort action has been done.
Function ’PRINTING AND PLOTTING’.
INVALID REGISTER SELECTION Copying to the same register is not
possible.
INVALID SELECTION Selected source is not valid.
FunSELECTIONctions ’ADD’, ’FILTER’,
’MATHEMATICS’, ’MULTIPLY’ and
’SUBTRACT’.
KEY INACTIVE WHEN STOPPED Pressed key is inactive when trace is
frozen.
Function ’RUN/STOP’.
NO AVERAGE IN ROLL MODE Average and Roll modes cannot be
combined.
Function ’AVERAGE’ and TB MODE’.
NO BATTERY BACKUP Battery backup not possible because of
absence of batteries.