Fluke PM3370B Hunting Equipment User Manual


 
FUNCTION REFERENCE 5 - 67
save: The actual set of settings is saved in the selected memory location.
recall: The settings saved in the selected memory location become the actual
settings.
undo: The settings previous to the last recall action become active again.
CLEAR & PROTECT: in the CLEAR & PROTECT SETUPS submenu ’PROTECT
on off’ can be used to protect a memory location by prohibiting save actions to this
location.
clear all: in the CLEAR & PROTECT SETUPS submenu ’clear all’ leads to a
confirm menu. The memory locations s1 to s10 are emptied altogether when ’yes’
is selected. Selecting ’no’ stops the clear action.
Note: Screen messages are given in the CRT viewing area when incorrect
commands are given and the action is prohibited. Example: When one
attempts to save settings to a protected memory location.
Key sequence:
Remote commands:
CPL: SS (To save a front in a desired memory)
RS (To recall a front from a desired memory)
PT (To program text into a setup register)
QT (To query text from a setup register)
Refer to Chapter 6 for details
SETUPS
TRACK
save
undo
recall
CLEAR&
PROTECT
undo
ST6766
9303
Settings memory selection.
Softkey to save the actual front settings.
Softkey to recall settings in selected memory
location
Softkey to recall settings from before the last recall
action
Softkey that leads to a dedicated menu to switch
the memory protection of the settings and to clear
memory contents.