Filter
Top Products
THE CPL PROTOCOL 6 - 11
GO to LOCAL GL
Purpose:
Puts the oscilloscope in the Local State. In the Local State, all oscilloscope
functions are accessible via the front panel buttons and knobs.
The Go to Local (GL) command performs the same function as pressing the
STATUS/LOCAL key on the front panel of the oscilloscope, when the oscilloscope
is in the Remote State (Refer also to "Go to Remote" and "Local Lockout").
Command:
Response:
Example:
100 PRINT #1,"GL" :’Send command
110 GOSUB 1000 :’Sync on acknowledge
Local, Remote, Remote+Local Lockout States
"GL" CR
acknowledge CR
power-on
<STATUS/LOCAL button>
Remote State
Remote with
Local Lockout
State
Local State
"Go to Local"
"Reset Instrument"
"Go to Local"
"Reset Instrument"
"Go to Remote"
"Local Lockout"