Fluke PM3370B Hunting Equipment User Manual


 
FUNCTION REFERENCE 5 - 27
Key sequence:
Remote commands:
CPL: QM (Command to query a measurement)
Refer to Chapter 6 for full details.
DELAYED TIMEBASE (DEL’D TB)
Description:
The Delayed Timebase (DEL’D TB) is used to examine a signal detail of interest.
The detail to be examined is indicated as an intensified part of the MAIN TB trace
and is displayed on the full screen width using the DEL’D TB time scale.
The DELAY control adjusts the delay between the start of the MAIN TB and DEL‘D
TB sweep. Refer to the TRIGGER DEL’D TB function for more details.
The DEL’D TB time scale is adjusted in steps with the delayed timebase
TIME/DIV key pair.
MEASURE MEAS1(2)
TRACK
delay
ST6754
9303
on off
Toggle softkey to select the delay measurement in
menu DELAY 1 or DELAY 2.
Control to select the reference waveform.
Toggle softkey to select the slope of the reference
waveform. Referred to "zero" delay.
Control to select the second waveform.
Toggle softkey to select the slope of the second
waveform.
Toggle softkey to switch the delay measurement
on and off.