Filter
Top Products
37
BAS-761
No.
1
2
3
4
5
6
7
8
Functions when ON
7 stitches counted before upper thread breakage is detected
OFF: 3 stitches counted before upper thread breakage is detected
After sewing, the work clamp and machine head return to the previous standby position, even if folding
has been completed.
Movement to the feed destination occurs immediately when the program data requires it.
After sewing, the timer starts 0.2 seconds after the work clamp is raised.
Not available (Should be set to OFF)
Not available (Should be set to OFF)
Not available (Should be set to OFF)
Not available (Should be set to OFF)
11. Using the DIP switches
¡ DIP switch C
¡ DIP switch D
No.
1
2
3
4
5
6
7
8
Functions when ON
The gauge standby position is always forward. When OFF: The gauge standby position is at the back.
Continuous label attachment mode When OFF: Alternate label attachment mode
Folder operates at low speed
Folder procedure changes
Folding is released when base 1.5 is raised
Not available (Should be set to OFF)
Not available (Should be set to OFF)
Not available (Should be set to OFF)
¡ DIP switch E
No.
1
2
3
4
5
6
7
8
Functions when ON
Not available (Should be set to OFF)
Not available (Should be set to OFF)
Not available (Should be set to OFF)
Not available (Should be set to OFF)
Not available (Should be set to OFF)
Not available (Should be set to OFF)
Not available (Should be set to OFF)
Not available (Should be set to OFF)