Filter
Top Products
16
BAS-761
6-2. Switch box panel buttones
6. Button functions
!9
@0
@1
@2
!9 FOLDER RESET button (carries out positioning when the power is turned on)
This button is used to stop the folder while folding is in progress and to reset he folding condition.
When the button is pressed once, folding is stopped, and when it is pressed twice, the folder is reset, and the
workpiece and the pocket can then be set.
@0 START button
This button is used to resume sewing after an emergency stop has occurred during sewing or after an upper thread
breakage has occurred. It should be pressed after the RESET button has been pressed.
In addition, if an error has occurred, this button is used to continue operation after the cause of the error has been
eliminated.
@1 RESET button
This button is used to trim the thread after an emergency stop has occurred during sewing or after an upper thread
breakage has occurred.
In addition, if an error has occurred, this button is used to clear the error status after the cause of the error has been
eliminated.
@2 EMERGENCY STOP button
This button is used to stop all operations.