Brother BAS-761 Watch User Manual


 
iii
BAS-761
CAUTION
Turn off the power switch at the following
times, otherwise the machine may operate if
the start switch is pressed by mistake, which
could result in injury.
• When replacing the needle
When not using the machine and when leav-
ing the machine unattended
Do not touch any of the moving parts or press
any objects against the machine while sew-
ing, as this may result in personal injury or
damage to the machine.
If an error occurs in machine operation, or if
abnormal noises or smells are noticed, im-
mediately turn off the power switch. Then
contact your nearese Brother dealer or a
qualified technician.
If the machine develops a problem, contact
your nearest Brother dealer or a qualified
technician.
This sewing machine should only be used
by operators who have received the
neccessary training in safe use beforehand.
The sewing machine should not be used
for any applications other than sewing.
Be sure to wear protective goggles when
using the machine.
If goggles are not worn, there is the danger
that if a needle breaks, parts of the broken
needle may enter your eyes and injury may
result.
Attach all safety devices before using the
sewing machine.
If the machine is used without these devices
attached, injury may result.
Sewing
Be sure to wear protective goggles and
gloves when handling the lubricating oil and
grease, so that they do not get into your eyes
or onto your skin, otherwise inflammation can
result.
Furthermore, do not drink the oil or eat the
grease under any circumstances, as they can
cause vomiting and diarrhoea.
Keep the oil out of the reach of children.
Avoid setting up the sewing machine near
sources of strong electrical noise such as
high-frequency welding equipment.
If this precaution is not taken, incorrect ma-
chine operation may re
Have two people present to hold the machine
head with both their hands when tilting it back
or returning it to its original position.
Machine installation should only be carried
out by a qualified technician.
Contact your Brother dealer or a qualified
electrician for any electrical work that may
need to be done.
The sewing machine weights more than 400
kg. The installation should be carried out
by two or more people.
Do not connect the power cord until instal-
lation is complete, otherwise the machine
may operate if the start switch is pressed
by mistake, which could result in injury.
Be sure to connect the ground. If the ground
connection is not secure, you run the risk
of receiving a serious electric shock.
Installation