Filter
Top Products
25
BAS-761
9. Sewing
9. Sewing
9-1. Sewing with the folder in automatic mode
2. Press the FOLDER RESET button !9.
The machine head will move to the home position and then
stop in the standby condition.
3. Set the folder mode to automatic mode.
NOTE:
Refer to page 18 for details on how to set the folder mode.
4. Press the STACKER button r so that the STACKER indicator is illuminated.
5. Place the workpiece w under the gauge assembly q. (*1)
6. Depress the foot switch @3. The vacuum system will start operating to hold the workpiece w in place.
NOTE:
If the foot switch @3 is depressed once more, the vacuum system will turn off while the foot switch @3 is being
depressed, allowing the workpiece to be positioned more easily.
7. Place the pocket material e on top of the gauge assembly q.
8. Press the RESTART buttones @4 simultaneously.
The pocket material e will be folded by the folder and the workpiece w and the pocket material e will then be
moved to the machine head and sewing will start. (*2)
9. Once sewing is finished, the stacker will operate and the workpiece w will be stacked. The machine head and the
work clamp will then return to the standby positions.
*1 If DIP switch D-1 has been set to ON, the gauge assembly q will retract. The gauge assembly q moves
forward at the same time the vacuum system starts operating when the foot switch @3 is depressed.
*2 If DIP switch A-1 has been set to ON, operation stops momentarily after folding has been completed so that
the folding can be checked. When the RESTART buttones @4 are pressed again simultaneously, operation
continues as before.
Press
FOLDER RESET SW
to start searching for home
position.
r
@4
e
w
q
@3
1. Turn on the air pressure and then turn on the power switch.
The following screen will be displayed on the panel.