Filter
Top Products
21
BAS-761
7. Settings before sewing
7-4. Setting the piece counter
¡ This setting can be made when the machine head is at the standby position and while the bobbin is being re-
placed.
¡ The piece counter can be set to "0" (reset), or it can be decremented by 1, It cannot be incremented.
Change piece counter.
PIECE COUNTER
1234
Screen 4
1. Press the COUNTER button i twice. Screen 4 will then
be displayed.
2. Press the FAST button !3 to reset the piece counter to
"0".
Press the arrow key !8 once to decrement the piece
counter by 1.
* If the CANCEL button !5 is pressed, the piece counter
value will not be changed and the screen will return
to the original display.
3. Press the ENTER button !6.
The piece counter will be changed to the new setting,
and the screen will return to the initial display.
7-5. Setting the stacker roller feed amount
¡ This setting can be made when the machine head is at the standby position and while the bobbin is being re-
placed.
Change stack feed length.
STACK FEED LENGTH
250 mm
Screen 5
1. Press the COUNTER button i three times. Screen 5 will
then be displayed.
2. Press the arrow keys !8 to select the desired stacker
roller feed amount.
The setting can be made in 9 steps from 0 mm to 400
mm, with each step being 50 mm.
3. Press the ENTER button !6.
The stacker roller feed amount will be changed to the
new setting, and the screen will return to the initial
display.