Filter
Top Products
8
BAS-761
4. Lubrication
4. Lubrication
Note:
Check for sufficient oil through oil gauge windows A and B on the machine head and the table.
If the oil amount is not sufficient, be sure to replenish it.
How to oil the machine head
Replenish the oil through oil port q.
How to oil the machine table
1 Move the machine head forward so that the lubrication hole e in the needle plate bracket RR w and the lubri-
cation port r in the machine bed are aligned.
2 Apply oil to the lubrication port r in the machine bed through the lubricationhole e in the needle plate bracket
RR w.
Note:
Before initial operation of the machine or after a long interval, be sure to drip a few drops of oil onto the arrowed
lubrication point C.
How to drain oil from the machine body
Remove poly-oiler t and drain the oil.
Rotary hook lubrication control
Turn the rotary hook lubrication adjustment valve y to adjust the lubrication amount.
r
y
t
A
B
C
w
e
q