Filter
Top Products
20
BAS-761
7. Settings before sewing
7-3. Setting the lower thread counter
¡ The lower thread counter determines how many workpieces can be produced according to the amount of lower
thread which has been wound inside the bobbin case.
¡ This setting can be made when the machine head is at the standby position and while the bobbin is being re-
placed.
Change bobbin counter.
BOBBIN COUNTER 60
Screen 3
1. Press the COUNTER button i once. Screen 3 will then
be displayed.
2. Use the arrow keys !8 to change the counter setting.
Use the [
] and [
] keys to select the column, and
use the [
] and [
] keys to change the digit.
If the CANCEL button !5 is pressed, the lower thread
counter will not be changed and the screen will return
to the original display.
3. Press the ENTER button !6.
The lower thread counter will be changed to the new
setting, and the screen will return to the initial display.
■ Replacing the lower thread
When the value for the lower thread counter becomes "0", the machine head automatically moves forward. After the
bobbin is replaced and the reset operation is carried out, the value for the counter returns to the setting value.
NOTE:
If the BOBBIN CHANGE button is pressed manually, and the above operation is carried out, the lower thread counter
will not return to the setting value. In addition, if the value is set to "0", the lower thread counter will not operate.