Axiom Memory Solutions HR600 Heart Rate Monitor User Manual


 
Setting Up Your HR600 For Use
The following instructions explain the complete setup pro-
cedure for all functions. If you’d like to program a single
function, advance to the main screen for that function
using the Mode button, and then press and hold the
Start/Lap button to enter the setup mode. Short presses of
the Start/Lap button will advance from one setup screen to
the next. Within each setup screen, the Stop/Adj and
Mode buttons will modify the values shown. To exit the
setup mode and return to a main screen, press and hold the
Light button.
Note: At any point during the setup mode, you may return to
the previous setup screen with a short press of the Light but-
ton. To exit the setup mode and return to a main screen,
press and hold the Light button.
Setting the Daily Alarm
Note: This setup screen can be accessed at any time from the
Time of Day main screen with a long press of the Start/Lap
button.
1. Advance to the Time of Day main screen using the Mode
button.
2. Press and hold the Start/Lap button. “ALM” and alarm
time will appear in the upper row of the display.
3. Press the Stop/Adj button to turn the alarm on or off.
When the alarm is activated, the alarm bell icon will appear
in the upper row of all main screen displays.
4. Press the Start/Lap button to select hours. The hours
will flash. Short presses of the Stop/Adj button will
advance the hours, while short presses of the Mode button
will decrease the hours. A long press of the Stop/Adj but-
ton will cause the hours to advance rapidly, and a long
press of the Mode button will cause the hours to decrease
rapidly.
5. Press the Start/Lap button again to select minutes. The
minutes will flash. Use the Stop/Adj and Mode buttons to
set the minutes.
6. A further press of the Start/Lap button will advance to
the Time of Day setup screen. Or, to exit the setup mode,
press and hold the Light button.
Note: To activate or deactivate the Daily Alarm, see “Alarms”
on page __ .
Setting the Time of Day and Date
Note: This setup screen can be accessed at any time from the
Time of Day main screen with a long press of the Start/Lap
button, and then three successive short presses of the
Start/Lap button.
9
8