Filter
Top Products
7. Time in Zone 2: Press the Start/Lap button again to
view Time Above Zone 2. (Note: If Zone 2 was not select-
ed during the workout, Zone 2 data will not be displayed.
Skip to step 10). “TiZ” and time accumulated above zone 2
will be displayed in the upper row of the display. Time
above zone as a percentage of total workout time will be
displayed in the lower row of the display
8. Press the Start/Lap button again to view Time In Zone
2. Time accumulated in zone 2 will be displayed in the
upper row of the display. Time in zone as a percentage of
total workout time will be displayed in the lower row of
the display.
9. Press the Start/Lap button again to view Time Below
Zone 2. Time accumulated below zone 1 will be displayed
in the upper row of the display. Time below zone as a per-
centage of total workout time will be displayed in the
lower row of the display.
10. Heart Rate Recovery Time: Press the Start/Lap button
again to view Heart Rate Recovery Time. “RCY” and the
most recently measured heart rate recovery time will be
displayed in the upper row of the display.
11. Lap Recall Data: Press the Start/Lap button again to
view the Lap Memory screens. If the Interval Timer rather
than Lap Timer was used, skip to step 16. If neither Lap
timer nor Interval timer was selected or used, this
button press will return to Time in Zone main screen.
38 39
The current total elapsed stopwatch time will be displayed
in the upper row of the display. “tot” and the current total
number of laps recorded will be displayed in the lower row
of the display. Note: If recall data is accessed while the
stopwatch is running, stopwatch time will continue to
accumulate although it will not be shown to advance in
the recall screen.
12. Press the Start/Lap button to view a scrolling sequence
of three recall screens for Lap 1. Each screen appears for
three seconds.
A) The first screen shows lap time in the upper row of the
display, and lap number in the lower row.
B) The second screen shows lap time in the upper row of
the display, and average heart rate for the lap (as bpm and
%MHR) in the lower row.
C) The third screen shows lap time in the upper row of the
display, and maximum heart rate for the lap (as bpm and
%MHR) in the lower row.
13. Press the Start/Lap button at any point during the
scrolling sequence to advance to the scrolling sequence for
Lap 2, and so on until the recall screens for all laps have
been viewed.
14. Press the Light button at any point during the scrolling
sequence to return to the scrolling sequence for the previ-
ous lap.