Filter
Top Products
G B
9
OW NE R' S MA NU AL
•
C 85
SAVE AND EXIT or continue your training session
by selecting CONTINUE.
MANUAL
Allows you to set your effort level with the selection
dial during the workout.
1. Select MANUAL.
2. Using the selection dial, choose your target value
for the session: time, distance or energy consumption.
Confirm your selection by pressing the selection dial.
3. Set the target value for the session using the
selection dial: set time (10-180 minutes), distance
(3-100 km) or energy consumption (50-2000 kcal).
Confirm your selection by pressing the selection dial.
4. Start your training session by pedalling. You can
increase or decrease the resistance (1-58 Nm) using
the selection dial. During training, you can display
resistance or heart rate using the selection dial.
5. Once the target value has been achieved, the meter
gives an audio signal. You can continue with your
exercise if you wish.
6. To stop the training session, press the BACK/STOP
button. You can then stop the session by selecting
EXIT, save the session to the memory by selecting
SAVE AND EXIT or continue your training session
by selecting CONTINUE.
TARGET HR
This program allows you to preset your pulse level,
i.e. the resistance is regulated so that your pulse
remains at the requested level. If the pulse tends to
rise, resistance is reduced automatically and vice
versa. The set value can be changed also during the
workout. The program requires measurement of heart
rate.
1. Select your TARGET HR.
2. Set the heart rate level (80-220) for the training
session using the selection dial. Confirm your
selection by pressing the selection dial.
3. Using the selection dial, choose your target duration
for the session measured in time, distance or energy
consumption. Confirm your selection by pressing the
selection dial.
4. Set the target value for the session using the
selection dial: set time (10-180 minutes), distance
(3-100 km) or energy consumption (200-8000 kcal).
Confirm your selection by pressing the selection dial.
5. Start your training session by pedalling. Using the
selection dial, you can change the heart rate level (80-
220). During training, you can display resistance or
heart rate using the selection dial.
6. Once the target value has been achieved, the meter
gives an audio signal. You can continue with your
exercise if you wish.
7. To stop the training session, press the BACK/STOP
button. You can then stop the session by selecting
EXIT, save the session to the memory by selecting
SAVE AND EXIT or continue your training session
by selecting CONTINUE.
TARGET EFFORT
By selecting the TARGET EFFORT program, you
can set the desired effort value in watts, i.e. pedalling
effort will be independent of pedal rotations. The set
effort value can also be changed during the workout.
1. Select TARGET EFFORT.
2. Set the effort level (20-600 W) of your training
session using the selection dial. Confirm your
selection by pressing the selection dial.
3. Using the selection dial, choose your target duration
for the session measured in time, distance or energy
consumption. Confirm your selection by pressing the
selection dial.
4. Set the target value for the session using the
selection dial: set time (10-180 minutes), distance
(3-100 km) or energy consumption (200-8000 kcal).
Confirm your selection by pressing the selection dial.
5. Start your training session by pedalling. You can
increase or decrease the resistance (20-600 W) using
the selection dial. During training, you can display
effort or heart rate using the selection dial.
6. Once the target value has been achieved, the meter
gives an audio signal. You can continue with your
exercise if you wish.
7. To stop the training session, press the BACK/STOP
button. You can then stop the session by selecting
EXIT, save the session to the memory by selecting
SAVE AND EXIT or continue your training session
by selecting CONTINUE.
PROGRAMS
This program contains ready-made training profiles.
The program changes automatically the intensity level
during your workout. The display shows the profile
and the changes, and the intensity can be manually
adjusted.
1. Select PROGRAMS.
2. Select a program (1-10) using the selection dial.
Profiles P1-P5 are watt control programs and P6-P10
are target heart rate programs requiring heart rate
measurement. Confirm your selection by pressing the
selection dial.
3. Using the selection dial, choose your target duration
for the session measured in time or distance. Confirm
your selection by pressing the selection dial.
4. Set the target value for the session using the
selection dial: time (10-180 minutes) or distance
(3-100 km). Confirm your selection by pressing the
selection dial.
5. Start the program by pedaling. You can increase
or decrease the resistance using the selection dial.
During training, you can display effort or heart rate
using the selection dial. The heart rate display requires
heart rate measurement.
6. Once the target value has been achieved, the meter
gives an audio signal. You can continue with your
exercise if you wish.
7. To stop the training session, press the BACK/STOP
button. You can then stop the session by selecting
EXIT, save the session to the memory by selecting
SAVE AND EXIT or continue your training session
by selecting CONTINUE.