Filter
Top Products
G B
3
OW NE R' S MA NU AL
•
C 85
•
The equipment must not be used by
persons weighing over 150 kg.
•
Make sure the equipment is unplugged
before carrying out any assembly or
maintenance procedures.
•
Do not attempt any servicing or
adjustments other than those described
in this guide. Everything else must
be left to someone familiar with the
maintenance of electromechanical
equipment and authorized under the
laws of the country in question to carry
out maintenance and repair work.
•
This product must be grounded. If
it should malfunction or breakdown,
grounding provides a path of least
resistance for electric current to reduce
the risk of electric shock. This product
is equipped with a cord having an
equipment-grounding conductor and
a grounding plug. The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.
DANGER:
Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician or serviceman if you are
in doubt as to whether the product is
properly grounded. Do not modify the
plug provided with the product - if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
SAVE THIS INSTRUCTION MANUAL
WELCOME TO THE WORLD OF
TUNTURI EXERCISING!
Your choice shows that you really want to invest
in your well being and condition; it also shows you
really value high quality and style. With Tunturi
Fitness Equipment, you’ve chosen a high quality,
safe and motivating product as your training partner.
Whatever your goal in training, we are certain this is
the training equipment to get you there. You’ll find
information about using your exercise equipment and
what makes for efficient training at Tunturi’s website
at WWW.TUNTURI.COM.
ASSEMBLY
Start by unpacking the equipment and check that you
have the following parts:
1. Front frame
2. Front frame support
3. Rear frame
4. Foot boards (2)
5. Handles (2)
6. Plastic covers for the cardan shaft (2)
7. Fastening piece for the console
8. Console
9. Transformator
10. Assembly kit (contents marked with an asterisk
* in the spare part list). Save the assembly kit, as you
may need it e.g. for eventual adjustments.
As for the assembly of the device, we recommend two
grown-up persons. If necessary, the packing material
can be used to cover the floosr on the assembly site.
Remove the carton frame from the plywood bottom
with e.g a screwdriver. Do not lift the rear frame from
the upper fringe of the ventilation hole!
If necessary, please contact your dealer with the
model, equipment serial no. and spare part no. of the
missing part. You’ll find a spare part list at the back
of this guide. The directions left, right, front and back
are defined as seen from the exercising position.
FRONT FRAME SUPPORT
Fasten the front frame support to the front frame with
two allen screws (A) and base plates (B).