Filter
Top Products
4
OW NE R' S MA NU AL
•
C 85
FRONT FRAME
1. Connect the cords from the front and rear frame
tube with each other.
2. Connect the frame tubes with each other.
PLEASE NOTE: Do not damage the console cord!
3. Tightly fasten the frame tubes with four allen
screws (C),
HANDLES
1. Unscrew the fastening screw of the plastic cover
at the upper end of the front frame tube and turn the
cover aside.
2. Set the handle at the end of the shaft and thread the
adjustment key cord from the handle over the shaft
into the front frame tube.
3. Thread the adjustment key cord through the round
console support tube in the front tube so that the cord
comes out from the upper end of the console support
tube.
CAUTION! Do not let the cords fall into the front frame
tube!
4. Push the handle onto the shaft simultaneously
pulling upwards the adjustment key cord from the
console support tube.
5. Lock the handle by fastening the base plate (D) and
the allen screw (E) at the end of the shaft.