Filter
Top Products
Groundsmaster 4000--D Page 7 -- 19 Chassis
NOTE: Most of the seat suspension components can
be serviced with the seat suspension base mounted to
the frame platform. Ifthe air spring assembly(item 6) re-
quiresremoval,the seatsuspension basewillhave to be
removed from the seat platform.
Disassembly (Fig. 16)
1. Remove operator seat from seat suspension (see
Operator Seat Removal in this section).
2. If the air spring assembly (item 6) or base plate (item
37) requires removal, remove seat suspension from
seat platform (see Operator Seat Removal in this sec-
tion).
3. Remove seat suspension components as needed
using Figure 16 as a guide.
Assembly (Fig. 16)
1. Install all removed seat suspension components us-
ing Figure 16 as a guide.
2. Install seat suspension if it was removed from seat
platform (see Operator Seat Installation in this section):
3. Install operator seat to seat suspension (see Opera-
tor Seat Installation in this section).
4. Make sure that seat electrical connectors are se-
cured to machine wire harness (Fig. 17).
1. Operator seat
2. Seat switch connector
3. Suspension connector
Figure 17
1
2
3
Chassis