Filter
Top Products
English
44
1.3 Installation and commissioning
Before connecting up the appliance, make sure that the power supply complies with the specifications on the
appliance's nameplate and the power plug version conforms to local regulations.
Place the connected scales on a level and stable surface. Select an installation site where the appliance is
protected from shocks, vibrations, intense heat or cold, draughts, chemicals and moisture.
The appliance may only be opened by trained service technicians. Before working on the appliance,
unplug the power supply. After power-on, the measured values stabilise after a warm-up period of
30 minutes.
Further information on power-on is provided in the 3030 Operating Manual on the CD.
Connections
1.4 Operating concept, keys and display symbols
The setting options are divided into two function ranges:
Setting mode
Here you can enter user-definable settings on the appliance to adapt the weighing system to your
requirements. For a description, refer to Chapter 2 Setting Mode in the manual.
Scale 3
Scale 2
Scale 1
Ground (GND)
Pressure compensation mem
I/O-Port
Anybus-Port
Ports 1 + 2
Power supply
Program settings
Weighing + taring
Totalising + batching
Counting
Checking
Classifying
Recipes
Weight conversion
Weighing vehicles
I/O port programming
Percentage weighing
Terminal
Version
Display
Keypad
Date/time
Organisation data
User password
Reset terminal
Scale
Scale parameter
IT
Data transfer
Alibi memory
Port 1
Port 2
Print view
I/O port settings
Fieldbus
Barcode
Service
Only for service
engineers.
Ba_3030_GB_neu.qxd 04.12.2006 11:01 Seite 4