Filter
Top Products
English
1133
3.0 Application programs
The various application programs on the Soehnle 3030 Programming Terminal
offer you a wide range of solutions for weighing operations.
You can adapt the application programs to your specific needs in Setting mode.
For information on this, please refer to the subject of Setting mode in the
detailed CD manual.
Below is a list of the application programs available to you:
1. . . . . . . . . . . . . . .Weighing and taring
2. . . . . . . . . . . . . . .Totalising and batching
3. . . . . . . . . . . . . . .Counting
4. . . . . . . . . . . . . . .Checking
5. . . . . . . . . . . . . . .Classifying
6. . . . . . . . . . . . . . .Recipes
7. . . . . . . . . . . . . . .Weight conversion
8. . . . . . . . . . . . . . .Vehicle weighing bridge
9. . . . . . . . . . . . . . .I/O port programming
10. . . . . . . . . . . . . .Percentage weighing
You will find a description of programs 5 to 10 in the detailed CD manual.
3.0.1 Selecting an application program
Switch the appliance on. After the power-on routine, the appliance starts the last
activated application program automatically.
Press the function change key (F>) to switch to the Setting Functions level to
select an application program.
Press F5 Program. You are now in the Program selection menu.
Selecting a program:
Press arrow key F3 Up or F4 Down.
Press F6 Accept to activate the marked program.
Gross X 10 Unit Program
Setting
mode
Ba_3030_GB_neu.qxd 04.12.2006 11:01 Seite 13