Filter
Top Products
English
2244
3.3.2 Counting display view
Tip: Activate and deactivate the additional display showing the weight info by pressing F3 Unit in the
Setting Functions level.
3.3.3 Taring
Taring functions same as for 3.1 Weighing and taring.
3.3.4 Counting function
The reference weight is measured by using the following keys in Level 1 Counting Functions:
Function key F1 Ref 10
Calculate the reference weight from a default reference quantity. Place 10 countable parts on the scale,
then press F1 Ref 10. The scale calculates the reference weight and displays "10 pcs". Further parts
placed on the scale are then counted.
Function key F2 Ref Variab
Calculate the reference weight from a freely selectable reference quantity. Place the reference parts on
the scale. Press F2 Ref Variab and type in the quantity of parts into the numerical keypad (1 to 99).
Press F6 Accept. The scale calculates the reference weight and displays the quantity on the scale.
Further parts placed on the scale are then added to the total.
Function key F3 Ref Wght
Default of a known reference weight.
Press the Ref Wght key and type in the known reference weight in the default unit into the numerical
keypad. An existing reference weight is displayed and can be overwritten.
Confirm your input by pressing F6 Accept.
The scale accepts the reference weight and displays the quantity on the scale. You can change the
default unit for the reference weight between g and kg by pressing the F> key.
Ba_3030_GB_neu.qxd 04.12.2006 11:02 Seite 24