Filter
Top Products
English
1177
Saving the new fixed value
Press F1 New.
The memory location number is assigned by the appliance. The first figure in brackets indicates the
number of free memory locations; the second figure shows the memory locations occupied by fixed tare
values. The Description parameter is marked. Call by pressing F6 Edit.
Type the value into the numerical/alphanumeric keypad. Accept the input by pressing F6.
(Clear the input without saving by pressing F5 Cancel). The Tare Weight parameter is marked.
Call by pressing F6 Edit. Type the value into the numerical/alphanumeric keypad.
Accept the input by pressing F6. (Clear the input without saving by pressing F5 Cancel).
Exiting the Fixed Value list
Press F5 Back to exit the list.
b) Calling the list of fixed tare values for taring
In the Taring Functions level, press F1 Tare Fixed. The display shows the last fixed value called.
Selecting from the list
- Browse using the arrow keys. Call the required fixed value by pressing F6 Accept.
- Call directly by typing in the memory location number. Type the article number or the memory location
number into the numerical keypad.
The choice of article number or memory location number is defined in Setting mode.
3.1.11 Error message when taring
Error 06:
Taring not possible.
Possible causes
- Scale empty
- Scale in overload or underload
- Manual tare input with tare value above maximum load.
3.1.12 Display options with the Info key
When you press the Info key, you have the following options:
- F1 Tare Fixed: Display stored fixed tare values.
- Tare key: Display current tare weight.
Ba_3030_GB_neu.qxd 04.12.2006 11:01 Seite 17