Filter
Top Products
English
3.3.7 Counting with several weighing platforms
If several scales are connected, the reference weight can be measured and
counted on each scale. For best results, we advise you to measure the reference
weight on the scale with the finest resolution.
Select a scale by pressing the Scale key.
After measuring the reference weight, you can switch to a bulk scale with a higher
load capacity in order to count large quantities precisely with the reference weight
determined using the reference scale.
Automatic switchover
You can define a default reference scale in Setting mode.
Switchover from bulk to reference scale and back is then automatic.
Place the reference quantity on the reference scale and press
Ref 10 or Ref Variable. The display switches to the reference scale.
The reference weight is measured and the bulk scale is switched to measuring
bulk. Alternatively, if you want to carry out counting operations on the reference
scale as well as measure the reference weight, then switch from the bulk scale
to the reference scale before measuring the reference weight.
3.3.8 Display options with the Info key
When you press the Info key, you have the following options:
F1 Tare Fixed = Displays stored fixed tare values.
F2 Ref Fixed = Displays the stored reference weights.
F3 Quant. Check = Displays the current setpoint with tolerance.
F4 Total = Displays the current content of the total memory.
F5 Plus = Displays all the current pieces in the total memory.
Tare key = Displays the current tare weight.
2288
Ba_3030_GB_neu.qxd 04.12.2006 11:02 Seite 28