Filter
Top Products
English
1100
2.6 Organisation data (identifiers)
Organisation data help to assign identifiers to document weighing operations,
e.g. article number, supplier, machine operator.
They are available in all application programs.
The 3030 Programming Terminal has 4 organisation data memories.
Each memory has:
- one user-definable description, e.g. "Article no." (up to 12 characters)
- one user-definable content, e.g. "1234" (up to 28 characters)
The description is entered in Setting mode; the content is entered during a weig-
hing operation. Type the description and content alphanumerically into the nume-
rical keypad.
Four keys "ORG A" to "ORG D" are provided to call the organisation data
memories.
Description input
Must be entered in Setting mode. For more information, see the detailed CD manual.
Content input
In Weighing mode, press the associated Org key to type in the content for the organi-
sation data memories. Type the content data alphanumerically into the numerical
keypad (max. 28 characters).
Confirm by pressing F6 Accept.
The description and content are then added to the weighing result as identification.
The content of the organisation data memory is retained until it is overwritten or
cleared.
Description Content
Ba_3030_GB_neu.qxd 04.12.2006 11:01 Seite 10