Filter
Top Products
English
2255
New reference weight
Previous reference weights are overwritten with the new reference weight calculated.
Displaying the reference weight
Press F3 Ref Wght in Level 1 Counting Functions.
Weight display during count operation
Press F3 Unit in Level 4 Setting Functions to activate the weight display at the top left of the display.
Terminating the count operation
Clears the saved reference weight to terminate the count operation and returns to the weight display:
Call the reference weight by pressing the Ref Wght key.
Clear by pressing the Clear key.
Accept by pressing the F6 key.
Fixed value memory for reference weights
You can save up to 400 reference weight in a failsafe memory.
Each memory location has:
- 3-digit consecutive numbers
- description (plaintext 18 characters)
- article number (18 digits)
- reference weight
- reference quantity
- tolerance plus
- tolerance minus
a) Calling the list of fixed reference weight values for editing
Press the Info key and then F2 Ref Fixed.
Selecting existing fixed values from the list.
Browse using the F3 and F4 arrow keys.
Call the required fixed value by pressing F6 Edit.
Editing an existing fixed value from the list
Call a marked fixed value for editing by pressing F6.
The Description parameter is marked. Call by pressing F6 Edit. Type in the value using the
numerical/alphanumeric keypad. Accept the input by pressing F6.
(Clear the input without accepting by pressing F5 Cancel).
You can edit other parameters in the same way.
Clearing an existing fixed value.
Browse using the F3 and F4 arrow keys.
Clear the marked fixed value by pressing F6 Cancel.
The gap in the consecutive number scheme is closed.
Ba_3030_GB_neu.qxd 04.12.2006 11:02 Seite 25