Filter
Top Products
English
2266
Saving the new fixed value
Press F1 New.
The memory location number is assigned by the appliance. The first figure in brackets indicates the
number of free memory locations; the second figure shows the memory locations occupied by fixed
tare values.
The Description parameter is marked. Call it by pressing F6 Edit. Type in the value using the
numerical/alphanumeric keypad. Accept the input by pressing F6. (Clear the input without accepting by
pressing F5 Cancel).You can edit other parameters in the same way.
Exiting the fixed value list
Press F5 Back to exit the list.
b) Calling the list of reference weights for counting
Press F4 Ref Fixed in Level 2 Checking Functions. The display shows the last fixed value called.
Selecting from the list.
- Use the F3 or F4 arrow key to browse through the list until you reach the required memory location.
Confirm the required fixed value by pressing F6 Accept.
- Calling directly by typing in the article number or memory location number.
Type the article number or the memory location number into the numerical keypad (Define whether the
article number or the memory location number is called in Setting mode (see manual). Type in the
article number as search term left-flush; type in the memory location number as search term
right-flush).
Confirm the required fixed value by pressing F6 Accept.
When a fixed value is called, the reference quantity and tolerances for quantity checking are also
accepted, provided these two parameters are also saved.
3.3.5 Totalising and batching
Totalising functions as in 3.2 Totalising and batching.
Totalising different countable parts
Totalising different countable parts can be prevented by enabling the measurement of a
new reference weight only after clearing the total memory using the option "Clear total" in
Setting mode.
3.3.6 Quantity check
The "Quantity check" function allows you to meter bulk goods pouring into a container or to check
quantities.
Example: 1000 countable parts must be filled in a container at a max. tolerance of 3%.
Example: Several batches must be counted to check compliance with quantity.
To call the quantity check function, you must be in Count mode, i.e. you must have defined a reference
weight.
Press the Quant. Check key in Level 2 Checking Functions.
Type the required quantity into the numerical keypad and confirm by pressing F6 Accept.
Type the required tolerance in parts or percent into the numerical keypad and confirm by pressing
F6 Accept.
Ba_3030_GB_neu.qxd 04.12.2006 11:02 Seite 26