Filter
Top Products
English
1155
3.1.3. Weighing without taring
Place weighing product on the scale. The weight is indicated with the message
"Gross".
3.1.4 Manual taring
Measure and tare with a container of unknown weight. Place the empty container
on the scale.
Press the Tare key.
The tare value is saved. The weight display is zeroed. The weight is displayed
with the message "Net".
When the scale is clipped off, the tare weight is displayed with a negative sign.
If you press the Tare key again, the existing value is overwritten, i.e. a new tare
weight placed on the scale is accepted.
The scale can be tared an unlimited number of times until the maximum load is
reached. The tared weight reduces the maximum weighing range accordingly.
Clear tare: By overwriting with a new tare or by pressing the Zeroing key.
Display tare memory: Press Info key, then press the Tare key.
You can clear the tare memory by pressing F2. Press F5 to terminate the display
of the tare memory without saving any changes.
If you want to change the tare memory value, type in the new value into the
numerical keypad and press F6 to accept the manual tare input into the tare
memory.
3.1.5 Taring by manual tare input
Tare a known container weight, e.g. with filled container on the scale.
Type the known tare weight into the numerical keypad.
The input appears in the display. The input is displayed in the activated weight
unit.
Press the Tare key.
The input is accepted in the tare memory and the tare weight is subtracted from
the weight displayed. The weight is displayed with the message "Net".
When the scale is clipped off, the tare weight is displayed with a negative sign.
Clear tare:
By overwriting with a new manual tare input or by pressing the Zeroing key.
To display the tare memory, press the Info key, then the Tare key.
Here, you can clear the tare memory by pressing F2. Press F5 to terminate the
display of the tare memory without saving any changes.
If you want to change the tare memory value, type in the new value into the
numerical keypad and press F6 to accept the manual tare input in the tare
memory.
Ba_3030_GB_neu.qxd 04.12.2006 11:01 Seite 15