Filter
Top Products
English
2299
3.4 Checking
Check whether the weighing product corresponds to a setpoint weight within a
default tolerance band. Example: Several weighing products must be checked for
compliance with the setpoint weight.
This function can also be used for weighing in a default setpoint.
Example: 50 kg must be filled in a container at a max. tolerance of 3%.
After placing the weighing product on the scale, the actual weight and a symbol
appear in the display to visualise a deviation from the setpoint.
3.4.1 Function keys
The F1 to F6 function keys help you control the functions. They are programmed
in three levels. Switch between the levels by pressing the function change
key (F>).
1st level: checking functions
2nd level: taring functions
3rd level: setting functions
Set point
Contr.
Fix
Cancel
Sum Plus
Tare
fix
Add
Tare
Zw
Tare
Multi
Tare
Gross X 10 Unit Program
Setting
mode
Ba_3030_GB_neu.qxd 04.12.2006 11:02 Seite 29