Filter
Top Products
English
3311
You can also display the difference between actual values and setpoint weights at the top left of the
additional display in figures with a + or - sign. Activate the additional display by pressing F3 Unit in the
Setting Functions level.
If you activated a memory location containing setpoints and tolerances in the Fixed Check memory,
the special characters are activated automatically.
A totalising/batching operation (accept in the total memory by pressing the Plus key) interrupts the
display of the quantity check special character until the scale is clipped off. The check special character
is then reactivated.
Displaying the setpoint and tolerance
You can request the current setpoint used by pressing the key combination Info and F3 Setpoint.
New setpoint
Previous setpoints are overwritten with the new setpoint entered.
Terminating the checking function
Clear the stored setpoint to terminate the check operation and return to the weight display.
Press F1 Setpoint in the Checking Functions level and then press the Clear key.
To change the program, press F5 Program in the Setting Functions level.
Fixed value memory for setpoints
You can store up to 400 setpoints in a failsafe memory.
Each memory location has:
- 3-digit consecutive numbers
- description (plaintext 18 characters)
- article number (18 digits)
- reference weight
- reference quantity
- tolerance plus
- tolerance minus
a) Calling the list of check weight fixed values for editing
Press the Info key and then F2 Check Fixed.
Selecting an existing fixed value from the list.
Browse using the arrow keys.
Call the required fixed value by pressing F6 Edit.
Editing an existing fixed value from the list
Call the marked fixed value for editing by pressing F6.
The Description parameter is marked. Call by pressing F6 Edit. Type in the value using the
numerical/alphanumeric keypad. Accept the input by pressing F6.
(Clear the input without accepting by pressing F5 Cancel).
You can edit other parameters in the same way.
Clearing an existing fixed value.
Browse using the F3 and F4 arrow keys.
Clear the marked fixed value by pressing F6 Cancel.
The gap in the consecutive number scheme is closed.
Ba_3030_GB_neu.qxd 04.12.2006 11:02 Seite 31