Filter
Top Products
English
2211
3.2.9 Piece counter
The piece counter only counts operations that are actually totalised. With every
new operation that uses Plus, Manual or Automatic Totalising, the piece counter
is incremented by 1. The piece counter runs up to 999; then an error message
appears. When a cancellation is made, the piece counter is decremented by 1.
The piece counter is automatically zeroed when the total is cleared.
3.2.10 Print keys
The Plus, Manual, Cancel and Total keys can initiate a print operation.
This is dependent on whether a print view was assigned to each of the keys.
For the Total key, the option "Print and clear" must be selected for the total
key function in Setting mode. If you select the "Display only" option, you only
obtain a printout when you press the Print key.
3.2.11 Displaying the current totals
During a totalising operation, you can display the totals reached by pressing the
Info key then the F4 Total key immediately after.
You can clear the totals by pressing F2 and the consecutive number
(if activated in Setting mode) or return to the totalising operation by pressing F6.
When you return, the last totalising operation appears in the information pane of
the display.
Ba_3030_GB_neu.qxd 04.12.2006 11:01 Seite 21