Filter
Top Products
English
1188
3.2 Totalising and batching
Totalising means that the individual pieces are weighed one after the other. The
weight is added in the total memory and the scale is clipped off after each
weighing operation.
Batching means that the weighed pieces remain on the scale.
The weight is added in the total memory and the scale is zeroed without being
clipped off.
A change in measuring point during batching is not possible.
The choice between totalising and batching is defined in Setting mode.
This selection applies to all connected weighing platforms.
As an example, we will only describe the totalising function here.
Total memory with several connected scales
A central total memory is managed for all connected scales.
Total memory capacity: The total memory holds a maximum of 999 entries.
The total memory must then be cleared.
3.2.1 Function keys
The F1 to F6 function keys help you control the functions.
They are programmed in 3 levels. Switch between the levels by pressing the
function change key (F>).
1st level: totalising functions
2nd level: taring functions
3rd level: setting functions
Sum Cancel Manual Plus
Tare
fix
Add
Tare
Zw
Tare
Multi
Tare
Gross X 10 Unit Program
Setting
mode
Ba_3030_GB_neu.qxd 04.12.2006 11:01 Seite 18