Filter
Top Products
Maintenance 51
Weekly Maintenance
Perform the following maintenance tasks every week:
1. Elevate the tread to maximum incline, then turn off the
power switch or circuit breaker and unplug the unit from
the wall outlet.
2. Clean the floor under the equipment using a vacuum
cleaner or a damp mop.
3. When the floor is completely dry, reconnect the power
and return the treadmill to the level position.
4. Inspect the power cord to verify that it is not pinched
under the equipment or between any two moving parts.
5. Test all console functions, including heart rate monitoring
features.
6. Verify that the unit sits squarely on the floor. All of its feet
should be touching the floor and the unit should not rock
or wobble when in use. If not, re-level it as described in
Leveling the Unit.
Monthly Maintenance
Perform the following maintenance tasks every month:
1. Turn off the power switch or circuit breaker, then unplug
the unit from the wall outlet.
2. Inspect the running bed and belt for wear.
3. Clean the treadmill’s frame using a cloth moistened with
water or an approved cleaner.
4. Use water and a soft nylon scrub brush to clean the outer
surface of the running belt.
5. Wipe the exterior of the console with a damp sponge or
soft cloth, and dry with a clean towel. Keep water away
from electronic components to prevent electrical shock or
damage.
6. Clean the touchscreen using a soft, lint-free cloth
dampened with a 91% isopropyl alcohol solution (either
as sold or diluted with an equal amount of water).
7. Remove the front cover and remove any lint or debris,
being careful not to damage the fan.
8. Vacuum out any debris, being careful not to bring the
vacuum cleaner nozzle too close to any circuit board
(unless your vacuum cleaner is protected against static
buildup).