Assembling the Treadmill 19
Hardware Kit (not to scale)
The hardware kit shipped with this equipment contains the
fasteners and other hardware components shown in the
following table. Before you begin assembly, make sure that
your hardware kit is complete. If not, please contact Precor
Customer Support.
Fasteners
Quantity
⁵₁₆-inch x ³₄-inch socket
head screws
8
⁵₁₆-inch x ³₄-inch
buttonhead screws (zinc
finish)
6
⁵₁₆-inch x ³₄-inch
buttonhead screws (black
finish)
4
Flat head hex drive screws
(¹₄-inch x ⁵₈-inch)
4
⁵₁₆-inch locknuts with star
washers
4
⁵₁₆-inch split lock washers 10
⁵₁₆-inch flat washers (zinc
finish)
6
⁵₁₆-inch flat washers
(black finish)
12
Note: Retrieve the cables and other hardware shipped with
the console before you begin installation.