Filter
Top Products
Assembling the Treadmill 23
2. Place the right-hand upright support into the base frame
side bracket.
3. Secure the right-hand upright support to the side bracket
using four socket head screws, four black washers, and
two locknuts. Partially tighten the fasteners.
Figure 7: Upright support attachment, right side
4. Using the Velcro connectors provided, attach the power
supply to the right-hand side of the front crossmember on
the treadmill base.
5. Route the DC output cable of the power supply through
the clips between the power supply and the belt motor.
Pass the end of the cable under the mounting bracket for
the lift motor.
6. Connect the black three-conductor plug on the AC wiring
harness to the socket on the power supply.