Filter
Top Products
20 Operating and Maintaining the P10 Console
To view the Club Settings:
1. At the Welcome banner, press Pause.
2. Press the following number keys in sequence to enter the
password:
5 6 5 1 5 6 5
3. Press OK.
The Set Club Parameters banner appears.
Table 2. Navigational keys for the system setting modes
Key Function
▲ or
▼
Navigates the settings menu
OK Selects a menu setting and confirms the changes made to
the value setting
CLEAR Returns to the previous menu level without saving changes
PAUSE Exits the System Settings mode and returns to the
Welcome banner
Club Parameters
Use the following information to customize the equipment for
your setting.
Note: When you make changes to the club parameters, the
new settings replace the factory default settings.
Safety Code (Treadmill only)
Value: Enabled or Disabled
(Default: Disabled)
When the equipment is shipped from the factory, the safety
code protection feature is disabled. If you enable the safety
code, your users will need to enter a four digit number to
begin their exercise session and start the running belt. The
code is 1 2 3 4.