Filter
Top Products
Important Safety Instructions 13
Treadmill Grounding Instructions
The treadmill must be grounded. If the equipment
malfunctions or breaks down, grounding draws off electric
current and reduces the risk of electric shock. The power cord
on the treadmill is equipped with a grounding conductor and a
three-pin grounding plug. This plug must be inserted into an
outlet that is properly installed and grounded in accordance
with all local codes and ordinances. Failure to ground the
treadmill properly may void the Precor Limited Warranty.
DANGER
Improper connection of the grounding conductor
can result in a risk of electric shock. Check with a
qualified electrician or service person if you are
not sure whether the equipment is properly
grounded. Do not modify the plug provided with
the treadmill. If the plug does not fit the outlet,
have a proper outlet installed by a qualified
electrician.
Electrical Recommendations: 120 V and
240 V Treadmills
Note: This is a recommendation only. NEC (National Electric
Code) guidelines or local region electric codes must be
followed.
You should have received a power cable that meets your local
electrical code requirements along with the equipment.
Precor treadmills must be connected to a 20 amp individual
branch circuit that can be shared only with one PVS. If you
need additional help with the power connections contact your
Precor authorized dealer.