Precor M9.55 Treadmill User Manual


 
page 5
Safety Approval
When identified with the ETL-c logo, the treadmill has been tested and conforms to
the requirements of CAN/CSA-E-335-1/2-94, Safety of Household and Similar
Electrical Appliances.
Grounding Instructions
The M9.55 Low Impact Treadmill must be grounded. If it should malfunction or break
down, grounding provides a path of least resistance for electric current which
reduces the risk of electrical shock. The treadmill is equipped with a power cord
having an equipment-grounding conductor and a grounding plug. The plug must be
inserted into an appropriate outlet that is properly installed and grounded in accor-
dance with all local codes and ordinances. If you do not follow these
Grounding
Instructions
, you could void the Precor limited warranty.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or service person if you are in doubt as
to whether the treadmill is properly grounded. Do not modify the plug provided with the
treadmill—if it doesn’t fit the outlet, get a proper outlet installed by a qualified techni-
cian.
120V Units Designated for U.S. Markets
The M9.55 treadmill must be connected to a 20 amp
dedicated
circuit having a
nominal rating of 120-volts. The treadmill’s grounding plug looks like the plug illus-
trated in Diagram 1. The power outlet must have the same configuration as the plug.
No adapter should be used with this product.
240V Units Designated for U.S. Markets
The M9.55 treadmill must be connected to a 20 amp dedicated circuit having a
nominal rating of 240-volts. The treadmill is factory-equipped with a specific power
supply cord to permit connection to a proper electric circuit. Make sure that the
treadmill is connected to an outlet having the same configurations as the plug. See
Diagram 1. No adapter should be used with this product. If the treadmill must be
reconnected for use on a different type of electrical circuit, the reconnection must be
made by qualified service personnel.
ATTENTION: Haute Tension
Débranchez avant de réparer
Diagram 1
Correct power outlet for
U.S. Markets: 15 amp
120-volt and 240-volt plugs.
120-volt grounding plug 240-volt grounding plug