Filter
Top Products
page 26
Changing the User Display Fields
When a user I.D. is displayed, you have the option to change the WEIGHT, COURSE,
and AGE displays by pressing a Change key and highlighting the information.
If you press the Change key to highlight WEIGHT, the information that appears on
the display changes accordingly. The information in the WEIGHT field (Field 2) blinks,
indicating that the treadmill is awaiting your input.
Diagram 16
M9.55 Setup display.
Field 1 Field 2 Field 3 Field 4
Upper
Display
The same is true when you press the Change key to highlight the COURSE or AGE
fields. Diagram 16 illustrates the different fields that exist within the display. The
following information describes what appears in the fields.
Note: Use the number or ▼▲ keys to change the blinking (highlighted) information.
When the User’s # or Name appears in the Upper Display:
Field 1 indicates the cumulative time spent on the treadmill. If the time spent on the
treadmill is less than one hour, the time is displayed as 0:MM (where MM equals
minutes). Less than 100 hours and time appears in hours and minutes (HH:MM). if
the cumulative time is greater than 100 hours, then time appears as hours only. The
number rolls over to zero when cumulative time becomes greater than 99999 hours.
Field 2 provides the cumulative distance in miles or kilometers depending on what
units of measure you choose. Refer to
Programming the M9.55 Treadmill
on page 32.
Field 3 shows the number of the last course used.
Field 4 displays the cumulative calories.
Press one of the first 4 number keys
while at the Precor banner to select a specific
user I.D. To delete workout statistics associ-
ated with that user I.D. and reset the factory
defaults, hold the number key for more than
14 seconds.
Center display indicates which
user I.D. or name is associated
with the field displays.
Press Change to highlight WEIGHT,
COURSE, or AGE fields.
USER#