Filter
Top Products
page 27
When the User’s # or Name appears in the Upper Display and you press the
Change key found directly below the WEIGHT indicator, the information in the
WEIGHT field begins to blink indicating that the treadmill is awaiting input. You can
change the number (from 1 to 999) using the ▲▼ keys or number keys. Once you
start working out, the WEIGHT indicator is disabled.
Field 1 indicates the cumulative time spent on the treadmill.
Field 2 shows the weight that you last entered.
Field 3 provides the number of the last course used.
Field 4 displays the cumulative calories.
When the User’s # or Name appears in the Upper Display and you press the Change
key found directly below the COURSE indicator, the COURSE # begins to blink and
the course profile associated with the course numberappears in the upper display.
Once the COURSE field (Field 3) is blinking, you can change the number (from 1 to
18) using the ▲▼ keys or number keys. Once you start working out the COURSE
indicator is disabled.
Field 1 indicates your best (or record) time that it took to run or walk the course. For a
fixed distance course, TIME displays your record time (the least amount of time it took to
run or walk the course). Otherwise the TIME display is blank or shows the time it took to
complete the course. Course times are displayed in hours and minutes (HH:MM).
Field 2 shows the distance in miles (or kilometers) that consists of your best (or
record) time for the course. Refer to
Programming the M9.55 Treadmill
on page 32.
Field 3 provides the number of the last course used.
Field 4 displays the highest number of calories burned while using the course. Note
that the field is blank if the Calories Goal course number appears in Field 3.
When the User’s # or Name appears in the Upper Display and you press the
Change key found directly below the AGE indicator, the information in the AGE field
begins to blink indicating that the treadmill is awaiting input. The age is associated
with the user I.D. and can be changed (from 1 to 99) using the ▲▼ keys or number
keys. Once you start working out the AGE indicator is disabled.
Field 1 indicates the cumulative time spent on the treadmill.
Field 2 provides the cumulative distance in miles or kilometers depending on what
units of measure you choose. Refer to
Programming the M9.55 Treadmill
.
Field 3 provides the number of the last course used.
Field 4 displays the number associated with your age.
Deleting Workout Statistics
To clear the workout statistics associated with a particular user I.D., you must take
the following steps.
At the Precor banner,
1. Select the user I.D. using a number key (1 - 4).
2. Press and hold the number key for about 14 seconds until you see the word
“CLEARED” appear on the display. Workout statistics are zeroed and default
values for course (#1, Manual), weight (150 lbs or 68 kg), and age (0) are restored.
The Goal and Interval course parameters are reset to factory standards.
WEIGHT
COURSE
AGE