Filter
Top Products
page 15
Handrail bracket
Diagram 9
Secure the handrail to the base.
b. Align the handrail bracket with the 3 base mounts and insert 3 screws (A) and
washers (B). See Diagram 9. Tighten the screws securely.
c. Return to the upper handrail screws and securely tighten each one.
d. Perform steps a. through c. on the opposite side.
e. Obtain assistance and remove the blocks from beneath the base.
Tighten these
screws first on
both sides of the
front plate.
Diagram 10
Tighten front plate
screws first. Then
securely tighten
all fasteners.
12. Tighten all mounting screws with the hex keys provided. Diagram 10. Start at
the front of the treadmill with the 4 screws that attach the upright supports to the
front plate. Tightening these screws first helps pull the rest of the treadmill’s parts
into alignment. Then, proceed with securely tightening the upright supports and
console assembly screws.