Filter
Top Products
532i Elliptical Fitness CrossTrainer Assembly Guide 8
Unwrap the cable and remove any kinks. Feed the cable
through the console bracket as shown in the illustration.
Lower the console bracket between the stabilizers and rest
the base of the bracket against the two bottom flanges. Align
the six mounting holes. Start with the side mounts and insert
the four hex head screws (A), with four split washers (E), and
four flat washers (B). Finger tighten.
Insert the two bottom hex head screws (A) with two split
washers (E), and two flat washers (B). Finger tighten.
Use a Phillips-head screwdriver to remove the four screws
that secure the back console plate to the display console. Set
the fasteners and cover aside.