Filter
Top Products
STEP 51:
FIGURE 51
44
57
13
50
16
92 3/8 X 3-1/4”
88 3/8 X 1-3/4”
40
• Route the PEC CABLE (50) around one 4-1/2” PULLEY (43) and assemble the 4-1/2” PULLEY (43) to the FLOATING PULLEY
BRACKET (16) using one 3/8 X 1-3/4” BOLT (88) and one 3/8” LOCK NUT (82). See FIGURE 51.
• Securely assemble the PEC CABLE (50) to the RIGHT PEC ARM (13) as shown in FIGURE 51.
• Assemble one 3-1/2” PULLEY (44) to the PEC PLATE (15) using one 3/8 X 3-1/4” BOLT (92), one 3/8 X 1” SPACER (57), one
3/8 X 1/2” SPACER (58) and one 3/8” LOCK NUT (82). See FIGURE 51.(Note: Loop the PEC CABLE (50) around the
PULLEY prior to assembling the PULLEY to the PEC PLATE.)
58
43
15
82