Filter
Top Products
FIGURE 22
22
STEP 22:
• Apply four PARAGLIDES (73) to the OUTSIDE of the PRESS INTERIOR ADJUST (34) as shown in FIGURE 22.
• CAREFULLY insert the PRESS INTERIOR ADJUST (34) into the EXTERIOR PRESS ADJUST (33) as shown in FIGURE 22.
73
33
34
39
107
PUSH-PULL
CABLE
• Insert the PUSH-PULL CABLE end thru the center of the REMOTE HANDLE RETAINER (107)and assemble the REMOTE
HANDLE RETAINER (107) to the RIGHT PRESS HANDLE (39) as shown in FIGURE 22. (NOTE: Make sure the grooves on
REMOTE HANDLE RETAINER (107) snaps into the holes on the RIGHT PRESS HANDLE (39) and that the REMOTE
HANDLE RETAINER (107) is orientated correctly.)