Filter
Top Products
STEP 37:
FIGURE 37
• Route the LAT CABLE (49) around one 3-1/2” PULLEY (44) and assemble two PULLEY PLATES (7) to the 3-1/2” PULLEY (44)
using one 3/8 X 1-3/4” BOLT (88) and one 3/8” LOCK NUT (82). See FIGURE 37.
88 3/8 X 1-3/4”
7
44
82
• Route the LAT CABLE (49) around one 3-1/2” PULLEY (44) and assemble the PULLEY to the BOOM BRACKET (8) using one
3/8 X 3-3/4” BOLT (93), two 3/8 X 1” SPACERS (57), and one 3/8” LOCK NUT (82). See FIGURE 37.
• Route the LAT CABLE (49) through the FRAME (1) and assemble one 3-1/2” PULLEY (44) to the FRAME (1) using one 3/8 X
3-3/4” BOLT (93), two 3/8 X 1-1/16” FLANGE SPACERS (56) and one 3/8” LOCK NUT (82). See FIGURE 37.
44
49
82
57
3/8 X 3-3/4” 93
93 3/8 X 3-3/4”
56
1
8
32