Filter
Top Products
FIGURE 17
19
STEP 18:
FIGURE 18
STEP 17:
• SECURELY assemble the FOOT PLATE (36) to the PRESS FRAME (32) using two 3/8 X 4” BOLTS (94) and two 3/8” LOCK
NUTS (82) as shown in FIGURE 17.
82
32
36
3/8 X 4” 94
• Assemble two SPRING PINS (78) to the RIGHT and LEFT SQUAT ARMS (41 & 42) as shown in FIGURE 18.
• Slide two PRESS ROLLER PADS (116) over the RIGHT and LEFT SQUAT ARMS (41 & 42) as shown in FIGURE 18.
• Pull back on the SPRING PINS (78) and slide the the RIGHT and LEFT SQUAT ARMS (41 & 42) over the PRESS PIVOT (35) as
shown in FIGURE 18.
116
42
41
35
78
69
• Cut the 1-5/8” X 5-1/2” NON-SKID STRIP (69) in half and assemble the NON-SKID STRIPS (69) to the FOOT PLATE (36) as
shown in FIGURE 17.