Filter
Top Products
20
FIGURE 19
STEP 20:
FIGURE 20
STEP 19:
• Insert two 3/4” FLANGE BEARINGS (53) and one 3/4” X 6” SHAFT (99) into the tube on the PRESS FRAME (32) as shown.
54
33
32
99
53
32
33
84
35
81
1/2 X 11” 98
• Insert two 1/2” FLANGE BEARINGS (54) into the PRESS EXTERIOR ADJUST (33) as shown in FIGURE 19.
• SECURELY assemble the PRESS PIVOT (35) to the PRESS FRAME (32) using one 1/2 X 11” BOLT (98), two 1/2”
WASHERS (81) and one 1/2” LOCK NUT (84).
• SECURELY assemble the PRESS EXTERIOR ADJUST (33) to the PRESS PIVOT (35) using one 1/2 X 11” BOLT (98), two 1/2”
WASHERS (81) and one 1/2” LOCK NUT (84).
73
• Apply four PARAGLIDES (73) to the INSIDE of the tube on the EXTERIOR PRESS ADJUST (33)as shown in FIGURE 19.