Filter
Top Products
36
STEP 44:
FIGURE 44
• Route the PRESS/LEG CABLE (47) around one 3-1/2” PULLEY (44) and assemble the 3-1/2” PULLEY (44) to the PULLEY
PLATES (7) using one 3/8 X 1-3/4” BOLT (88) and one 3/8” LOCK NUT (82). See FIGURE 44.
88 3/8 X 1-3/4”
82
44
7
STEP 45:
FIGURE 45
• Route the PRESS/LEG CABLE (47) around one 3-1/2” PULLEY (44) and assemble the 3-1/2” PULLEY (44) to the bracket on the
REAR UPRIGHT (6) using one 3/8 X 1-3/4” BOLT (88) and one 3/8” LOCK NUT (82). See FIGURE 45.
3/8 X 1-3/4” 88
82
44
6
47
47