Filter
Top Products
FIGURE 23
23
STEP 23:
PUSH-PULL
CABLE
• Assemble the PUSH-PULL CABLE to the PRESS ADJUST HANDLE (106). Insert the small round barrel on the PUSH-PULL
CABLE into the groove of the PRESS ADJUST HANDLE (106) as shown in FIGURE 23.
107
109
106
106
39
108
• Assemble the PRESS ADJUST HANDLE (106) to the REMOTE HANDLE RETAINER (107) using one HANDLE PIVOT PIN
(109) and one 3/16” EXTERNAL E-RING (108) as shown in FIGURE 23.
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2