Filter
Top Products
38
STEP 47:
FIGURE 47
• Route the PRESS/LEG CABLE (47) around one 3-1/2” PULLEY (44) and assemble the 3-1/2” PULLEY (44) to the PULLEY
PLATES (7) using one 3/8 X 1-3/4” BOLT (88) and one 3/8” LOCK NUT (82). See FIGURE 47.
STEP 48:
FIGURE 48
82
44
47
88 3/8 X
1-3/4”
7
• Assemble one 3-1/2” PULLEY (44) to the BASE PLATES (11) using one 3/8 X 3-3/4” BOLT (93), two 3/8 X 1” SPACERS (57) and
one 3/8” LOCK NUT (82). See FIGURE 48.(Note: Loop the PRESS/LEG CABLE (47) around the PULLEY prior to assem-
bling the PULLEY to the BASE PLATES.)
47
3/8 X 3-3/4” 93
82
57
44
11