Filter
Top Products
39
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
STEP 49:
FIGURE 49
• Route the threaded end of the PRESS/LEG CABLE (47) thru FRAME (1) and assemble the swivel end of PRESS/LEG CABLE (47)
to the LEG PEDESTAL (2) using one 3/8 X 1-3/4” BOLT (88) and one 3/8” LOW HEIGHT LOCK NUT (83). See FIGURE 49.
88 3/8 X 1-3/4”
2
47
83
1
STEP 50:
FIGURE 50
3/8 X 2-3/4” 90
55
1
80
44
• Securely assemble the PRESS/LEG CABLE (47) and one 3-1/2” PULLEY (44) to the FRAME (1) using three 3/8 X 2-3/4” BOLTS
(90), two 3/8” X 9/16” FLANGE SPACERS (55), four 3/8” WASHERS (80) and three 3/8” LOCKNUTS (82). (NOTE: The PRESS/
LEG CABLE (47) must be routed over the retaining bolt as shown in FIGURE 50.)
47
82